Fahren Z1 CarPlay Wireless Adapter – Installation Guide

Fahren Z1 CarPlay Wireless Adapter – Installation Guide

Follow these simple steps to set up your Fahren Z1 CarPlay adapter and enjoy wireless CarPlay in your vehicle:

 Step-by-Step Instructions

1. Plug in the Adapter
   Insert the Fahren Z1 CarPlay adapter into your vehicle’s USB port or Type-C port.

2. Wait for the Lights to Turn On
   Once connected, the adapter’s indicator lights will turn on, signaling that it’s powered and ready.

3. Car Screen Enters Pairing Mode
   Your car display will automatically switch to the pairing page.

4. Turn On Your Phone’s Wi-Fi
   Enable WLAN (Wi-Fi) on your smartphone to begin the connection process.

5. Turn On Bluetooth
   Enable Bluetooth on your phone to search for the adapter.

6. Find the Device “AIBox-BT-CCD3”
   In your phone’s available Bluetooth or Wi-Fi devices list, locate and select “AIBox-BT-CCD3”.

7. Pair with the Device
   Follow the on-screen prompts to complete pairing between your phone and the adapter.

8. Click “Use CarPlay”
   Once connected, tap “Use CarPlay” on the car display to launch wireless CarPlay.

 Tips for a Smooth Setup

• Make sure your vehicle supports wired CarPlay (Z1 works by converting it to wireless).

• Ensure your phone is running the latest iOS version.

• If the car screen doesn’t switch automatically, unplug and reinsert the adapter.

• Allow CarPlay permissions if prompted on your iPhone.

Troubleshooting