Skip to content
🚚 Free Shipping on All Order | Local Fast Delivery
🚚 Free Shipping on All Order | Local Fast Delivery

Z1 Carplay Adapter

Fahren Z1 CarPlay Wireless Adapter – Installation Guide

Follow these simple steps to set up your Fahren Z1 CarPlay adapter and enjoy wireless CarPlay in your vehicle:

 Step-by-Step Instructions

  1. Plug in the Adapter
    Insert the Fahren Z1 CarPlay adapter into your vehicle’s USB port or Type-C port.

  2. Wait for the Lights to Turn On
    Once connected, the adapter’s indicator lights will turn on, signaling that it’s powered and ready.

  3. Car Screen Enters Pairing Mode
    Your car display will automatically switch to the pairing page.

  4. Turn On Your Phone’s Wi-Fi
    Enable WLAN (Wi-Fi) on your smartphone to begin the connection process.

  5. Turn On Bluetooth
    Enable Bluetooth on your phone to search for the adapter.

  6. Find the Device “AIBox-BT-CCD3”
    In your phone’s available Bluetooth or Wi-Fi devices list, locate and select “AIBox-BT-CCD3”.

  7. Pair with the Device
    Follow the on-screen prompts to complete pairing between your phone and the adapter.

  8. Click “Use CarPlay”
    Once connected, tap “Use CarPlay” on the car display to launch wireless CarPlay.

 Tips for a Smooth Setup

  • Make sure your vehicle supports wired CarPlay (Z1 works by converting it to wireless).

  • Ensure your phone is running the latest iOS version.

  • If the car screen doesn’t switch automatically, unplug and reinsert the adapter.

  • Allow CarPlay permissions if prompted on your iPhone.

Troubleshooting

Issue Possible Solution
No lights on the adapter Check the port or try a different USB socket
No pairing page on screen Restart the car or unplug and replug the adapter
Can’t find AIBox-BT-CCD3 Restart your phone’s Wi-Fi/Bluetooth and search again
Paired but no CarPlay Go back to the car’s pairing page and click “Use CarPlay” manually