Fahren H7 LED Headlight Install – So Easy Anyone Can Do It!
Step-by-Step Installation Instructions
1. Disconnect the plug
Open the headlight housing and locate the factory halogen bulb. Unplug the connector from the back of the bulb by gently pulling it out.
2. Pull up the spring buckle
Most H7 halogen bulbs are held in place with a metal spring clip. Carefully pull up the spring buckle to release the bulb.
3. Remove the halogen bulb
Once the clip is released, take out the old halogen bulb from the socket.
4. 1:1 Size Design – Perfect Fit
Our LED bulbs are designed with a 1:1 size ratio to match the original halogen bulb. This ensures easy installation and no need for modifications.
5. Align to the socket housing
Take your new LED bulb and align the metal base to the socket housing. Make sure the notches match the shape of the socket.
6. Insert the LED bulb
Gently push the LED bulb into the socket, making sure it sits snug and flat.
7. Secure the spring buckle
Push the spring buckle back down to lock the bulb in place. Make sure it's firmly secured so the bulb doesn't move.
8. Reconnect the plug
Finally, reconnect the original plug to the back of the LED bulb. Some vehicles may require a polarity check — if the bulb doesn't light up, try flipping the plug 180 degrees and reconnecting.